J’ai ajouté les températures pour mon nouveau procésseur. Il vous faut un lm_sensors récent (j’ai pris le 3.1.1 sorti fin juin) : http://dl.lm-sensors.org/lm-sensors/releases/ et ensuite compilez et lancez sensor-detect puis lancez ceci:

modprobe w83627ehf
/usr/bin/sensors -s


Une fois que çà marche, testez le tout avec sensors :

w83667hg-isa-0290
Adapter: ISA adapter
in0: +1.14 V (min = +0.00 V, max = +1.74 V)
in1: +1.71 V (min = +1.42 V, max = +1.11 V) ALARM
in2: +3.34 V (min = +1.02 V, max = +2.10 V) ALARM
in3: +3.31 V (min = +3.14 V, max = +0.10 V) ALARM
in4: +1.67 V (min = +1.32 V, max = +0.70 V) ALARM
in5: +2.04 V (min = +1.25 V, max = +0.00 V) ALARM
in7: +3.41 V (min = +0.45 V, max = +2.08 V) ALARM
in8: +3.31 V (min = +0.06 V, max = +0.83 V) ALARM
fan1: 981 RPM (min = 84375 RPM, div = 8) ALARM
fan2: 0 RPM (min = 659 RPM, div = 32) ALARM
fan3: 0 RPM (min = 56250 RPM, div = 4) ALARM
fan4: 792 RPM (min = 3013 RPM, div = 8) ALARM
fan5: 998 RPM (min = 33750 RPM, div = 8) ALARM
temp1: +48.0 C (high = +33.0 C, hyst = +73.0 C) ALARM sensor = thermistor
temp2: +52.5 C (high = +80.0 C, hyst = +75.0 C) sensor = diode
temp3: -19.5 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor
cpu0_vid: +2.050 V


En cadeau, l’ebuild gentoo pour la 3.1.1 (à placer dans /usr/portage/sys-apps/lm_sensors/lm_sensors-3.1.1.ebuild : http://frlinux.net/files/lm_sensors-3.1.1.ebuild